» Home » About Us » Contact Us
 
 
 

Industrial Grades

   
  Turbine Oils
  Bearing Oils
  Hydraulic and Circulating Oils
  Compressor Oil
  Contact For Equ.HP Lubricant
 

Send Your Feedbak

 Name*
 Email*
 Mobile*
 Comment*
 
 

Compressor Oil

 

Hycom C 100, 150,220,320

Special features:
These are compressor oils formulated with selected base stocks and a special compounding agent to give excellent resistance to washing effect of water. these are further fortified with anti-rust and anti-corrosion agent and have good fluidity at low temperature.
hycom c grades meet din 51506

Application areas :
Hycom c grades are recommended for cylinder lubrication of single and multistage air compressors with moist air and provide excellent lubrication of piston rings, valves, cylinder liners etc. Hycom c 460 has low sulphur content for applicat ions in ammonia synthesis commpressors in fertiliser plants

Properties Hycom C 100/150/220/320
100 150 220 320 460
Kinematic viscosity, cst. @ 40°c 95-105 140-160 210-230 310-330 414-506
Flash point,(coc),°c, min 190 210 240 248 290
Saponification number, koh/g 2.5-5.0 2.5-5.0 2.5-5.0 7-10
Pour point, °c, max (-)6 0 3 6 -9
Conradson carbon residue % wt max 0.7 1.0 1.4 2.0 0.7

Performance benefits :
• Excellent water washing resistance
• Good fluidity at low temperature
• High anti rust and anti corrosion properties

 

Hycom 32,46,68,100,150

These compressor oils are developed to meet satisfactory lubrication under moderate oxidation and thermal performance. hycom grades are blended from neutral base stocks with suitably selected high performance anti-oxidant, anti-rust foam additives.

Passes the pneurop oxidation test without catalyst & din 51352 part i. exceeds the requirements of din 51506vc-l specifications.

Application areas :
This is suitable for moderate performance reciprocating rotary air/screw compressors up to a discharge air temperature of 220°c. these oils are suitable for use in air vacuum pump designed to deliver at a pressure greater than atmosphere pressure. it is suitable for lubrication of air compressors with lubricated compression chambers not provided with cooling by injection

Properties Hycom
32 46 68 100 150
Viscosity,cst@ 40°c 29-35 42-50 62-74 90-110 135-165
Viscosity,index, min 95 95 95 95 95
Flash point ,coc, °c,min 175 195 195 205 210
Pour point,°c max (-)9 (-)9 (-)9 (-)9 (-)3
Fzg,failure load stage,min 9 9 9 9 9
Total acidity,mg koh/gm 0.1 0.1 0.1 0.1 0.1
Ageing characterisics increase of ccr % mass max 1.5 1.5 1.5 1.5 1.5
 

Hycom nh 32,46,57

It is blended out of highly refined turbine base stocks and special types of anti-oxidants, anti-rust, anti-foam and demulsifier which do not react to any of the types of gases.

Performance benefits :
This oil has good demulsibility property, low deposits and sludge foaming tendency at a wide range of working temperature and in any gaseous atmosphere.
it meets din 51506 vdl specifications.

Application areas :
Hycom nh grades are specially developed oil for excellent lubrication of ammonia and synthetic gas compressors. it is suitable for use in both screw and centrifugal type compressors and is compatible with any other oil with conventional additive system.

Properties Hycom nh
32 46 57
Viscosity,cst@ 40°c 29-35 42-50 55-60
Viscosity,index, min 100 98 95
Flash point ,coc, °c,min 220 220 220
Pour point,°c max (-) 18 (-) 15 (-) 12
Fzg,fls, min 11 11 11
Total acidity,mg koh/gm 0.2 0.2 0.2
Ageing characterisics increase of ccr % mass max 1.5 1.5 1.5
 

Hycom 150 p

Special features:

Compressor oil developed for indian railways

Specifications :

Meets is : 13256 : 1992 dab & din 51506 vdl grades

Application areas:

Compressors and expressors of diesel locomotives of indian railways manufactured by kirloskar pneumatics

 

Properties Hycom 150 p
U viscosity @ 40°c 135-165
Viscosity,index, min 95
Flash point ,°c,min 210
Pour point,°c max -15
Demulsibility @82 deg c in20 minutes, ml 40: 40:0

Performance benefits :
• Excellent demulsibility
• Excellent oxidation stability
• High load bearing capability

 

Hycom vdlt 32 ,46, 68,100, 150, 220, 320

Compressor oils specially blended from saturated paraffinic turbine base stocks and selected premium grade of anti-oxidants, anti-rust, antifoam and anti-wear additives.

It passes the stringent pneurop oxidation performance test with catalyst and din 51352 part ii. it meets the requirements of din 51506 vdl-l and iso dis 6521 specifications. it also exceed sperry vickers i-286-s, afnor nfe 48603 (hm) and cincinnati milacron p-68, p-69, p-70 specification :13256 :1992 dab

Application areas :
Grades most suitable to be used in high performance reciprocating rotary air compressors/screw compressors. this can be used up to 250 °c air discharges temperature. it is suitable for sir vacuum pump designed to deliver at a pressure higher than atmospheric pressure. it is suitable for lubrication of air compressors with lubricated compression chamber, not provided with cooling by injection

Properties Hycom vdlt
32 46 68 100 150 220 320
Viscosity, cst @, 40°c 29-35 42-50 62-74 90-110 135-165 210-230 290-350
Viscosity index,Min 95 95 95 95 95 95 95
Flashpoint, Coc,°c, Min 175 195 195 205 210 215 220
Pourpoint,°C Max (-)9 (-)9 (-)9 (-)9 (-)9 (-)15 (-)3
Fzg,Failure load stage, Min 9 9 9 9 9 9 9

Performance benefits :
• Excellent demulsibility
• Low volatility & excellent oxidation stability

For further information please contact our nearest regional office

 
Manifacturer India